+

=

 

Tie setting

Tie setting

KNOTS   

There are many versions of knots for setting of ties. However not all use them. It is good, if the man knows at least with one-two variants of setting of knots. And still sometimes so it would be desirable new or simply obliges a social status. And then our councils to the aid will come.

• always it is necessary to do Knot directly on a collar, instead of in hands.

• the Wide end should not turn out as a result too long or short, 2 sm ­ below a belt - its optimum length. For this purpose the tie needs to be passed under a collar so that its narrow end has appeared at level of half of length wide.

THE EAST

East knot by right is considered one of the most simple ways of setting of a tie. To meet this knot it is possible not too often. Other names - red knot, small knot.

East knot is used for setting of the ties executed from a heavy material, including knitted, wattled and woollen.

Advantages of this knot that it has the small size which underlines advantages of a heavy material. A lack is that its setting demands special attention. Otherwise you risk to give the negligent, incorrectly executed form of knot, or the tie can spontaneously be untied, sometimes during the most improper moment.

Take the tie ends. Cross their wrong side outside. Обратитe special attention the narrow end of a tie should be over wide and ­ is directed to the right. (1).

Stretch the wide end of a tie to the right and put it over the narrow end. (2).

Then draw it from below upwards through a neck loop. At you the ear will turn out.

It is necessary to stretch the wide end of a tie in this formed ear (3). Having tightened, you given east knot (4).

Simple (four in hand)

East knot is considered most easy in performance, however there is a version of knots of a tie which has received «green street» and is popular at many men. Because for setting of this knot it is not required to you a lot of time, skill. You should ­ look narrowly attentively at drawings to understand, how to create simple, but such attractive magnificence. In English language the simple knot is known under other name - «four in hand». After setting the thin knot having the conic form turns out. An obligatory condition - absence of symmetry, that is knot it should not be looked as a correct triangle. It gives it a touch of easy negligence. The basic advantage is that it can be fastened on a tie of any length and executed of any material.

The wide end of a tie put from above on the narrow. To "look" the wide end should to the left. Knot is fastened on a tie face side.

Now the wide end of a tie should from below narrow be spent to the right side (2).

With the wide end of a tie wind from above the narrow end having directed it on the left (3). 

 Now it is necessary to you from below upwards through a neck loop to pass the wide end of a tie (4).

Stretch it downwards through the formed hinge eye (5).

It is necessary to pull together knot and to give it the correct form (6).

"CALVIN"

The version of east knot is knot "Calvin". It is little bit more difficult than east, however gives to the owner additional charm. "Calvin" differs from east knot one more turn of the wide end round the basic knot. And as result - beautiful original knot which is distinguished by absolute symmetry and a little increased density.

 

Knot start to fasten on a tie seamy side. The tie ends are necessary for crossing. It is very important, that the narrow end of a tie in this case was over the wide end. A direction - to the right (1). The wide end turn to the right so that it has laid down over narrow (2).

Wrap up narrow the wide end so that last has appeared directed to the left (3). Once again wrap up the wide end narrow over the received small pillow of knot. After such turnover the wide end should be directed to the right (4).

 

Now the wide end stretch in a cervical loop (5).

The ear through which and it is necessary to stretch the wide end of a tie was formed. It is necessary to straighten and straighten knot (6).

THE DIAGONAL

This way of setting of ties is similar to knot "Calvin", anyway the scheme of setting of these knots identical.

There is only one difference: the wide end of a tie is necessary for passing in a cervical loop twice. Very original and not absolutely habitual knot As a result turns out. However setting of diagonal knot - difficult enough employment, which not always under force even to skilled experts. And still the result costs spent time!

Knot setting needs to be begun with a tie face sheet. Cross the tie ends. The wide end should be over narrow and to be directed to a left-hand side (1).

Having bypassed the narrow end from below, the wide end goes to the right (2).

Then it turns around round the narrow end again to appear on the right side (3).

Stretch the wide end in ­ the formed cervical loop so that it has entered into it from above and has been directed to the left (4).

In the course of knot setting ­ the ear in which it is necessary to stretch the wide end of a tie going from top to down (5) was formed.

The ear in which it is necessary to stretch the wide end of a tie going from top to down (5) was formed.

 

"NEW-CLASSIC"  

 

This knot is better to use for setting of not too long ties executed from average heavy materials. On the size the knot occupies average position between simple knot and «Half Windsor» and is looked as a narrow triangle. "Nju-classic" it is impossible to name knot which is fastened from the first. To learn it to fasten, time and skill are necessary.

 

At setting of this knot it is necessary to pay attention to an arrangement of its ends: at crossing the wide should be directed to the left and be under narrow, and a seamy side upwards, and narrow should be directed to the right side (1).

Bend the wide end of a tie upwards, having made it so that its wrong side was inside (2)

 

Wrap up the wide end narrow and lead it to the right. It should pass through a cervical loop (3). The wide end wrap up narrow, having directed it in a left-hand side (4).

Then you should pass the wide end of a tie in a cervical loop from below upwards. The ear is formed. In this ear also it is necessary to pass the wide end of a tie (5). Now it is necessary to pull together accurately knot and to straighten it (6).

 

"PRATT"

This tie the knot which date of birth considers 1989 has the double name. And all because two persons are considered as its authors: Jersey Pratt and John Shelbi. In this connection Europe connects this knot with Pratt's name, and America - with a name of Shelby.

The knot "Pratt" for the short ties having a stuffing is used. The tie form very much reminds "Windsor".

Setting should be begun with a tie seamy side. Cross its ends: the wide end is under narrow which is directed to the right side (1).

Take the wide end and on correct it upwards so that it, having wrapped up itself the narrow end, has passed in a cervical loop. This end should "look" downwards (2).

Try to tighten cautiously turned out connection (3). Again undertake the wide end direct it to the right side, trying to wrap up to them from above the narrow end (4). Lift the wide end upwards, coming from below in a cervical loop (5). At you the ear in which it is necessary to involve the wide end of a tie was formed. Tighten knot (6).

"VICTORIA"  

One more of "colleagues" of simple knot. Its difference consists that it has an additional thickening which is easy for making, twice having wrapped up one of the ends round a loop. Such knot will help to hide lacks of the ties thin or lost a kind

 


Возврат к списку


 Поиск на сайте:
 
 Поиск в интернете:
Пользовател ьского поиска

Сайт работает на 1С-Битрикс Разработка и дизайн - "Эккаунт" ПОМОГИТЕ СПАСТИ ЛИЗУ